

4 students of the Master in Automation and Control Engineering, Isabella Lanzani, Sofia Guerra, Simone Dassi e Federico Pirillo, took part to the automatic control international competition “Grinding Plant Control Challenge 2022” organized by IFAC (ifacmmm2022.org/control-challenge), and they got the third place.
The aim of the challenge was to guarantee that a grinding plant – whose model had been given as a black box – works according to a set of desired specifications for 50 hours. The specifications entail the control of pressure and level of a tank, optimizing a quality parameter related to the granularity of the plant output.
Students must develop their control solution and present it to the panel.
The challenge was participated in by:
4 studenti del corso di Laurea Magistrale in Automation and Control Engineering, Isabella Lanzani, Sofia Guerra, Simone Dassi e Federico Pirillo, hanno partecipato alla competizione internazionale di controlli automatici “Grinding Plant Control Challenge 2022” organizzata dall’IFAC (ifacmmm2022.org/control-challenge), piazzandosi al terzo posto.
L’obiettivo era garantire il corretto funzionamento di un impianto di macinazione – di cui è stato fornito un modello non ispezionabile – per 50 ore; le specifiche erano il rispetto di due vincoli (pressione e livello del serbatoio) e come obiettivo l’ottimizzazione di un parametro di qualità (relativo alla granularità del composto in uscita dall’impianto).
Gli studenti dovevano sviluppare la soluzione di controllo e presentarla alla giuria, il tutto si è svolto tra marzo e aprile 2022
La partecipazione alla competizione è stata la seguente:
The Automation and Control Engineering Programme offers a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Thursday, March 31st 2022 at 14 there will be the sixth seminar of the series, held by Dr. Giovanni Licitra from Neurocast B.V.
The seminar will be held in English.
Il Corso di Studio in Ingegneria dell’Automazione propone una serie di seminari “Automation and Control Industry Seminars”, tenuti da persone che lavorano in diversi settori industriali e indirizzati primariamente agli studenti iscritti al terzo anno della Laurea e ad entrambi gli anni della Laurea Magistrale.
Martedì 14 dicembre 2021 dalle 14 alle 15 si terrà il quinto seminario della serie, tenuto dal Dr. Daniele De Vito di Electrolux Italy S.p.A.
Il seminario sarà tenuto in lingua inglese.
The Automation and Control Engineering Programme offers a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Tuesday, December 14th 2021 at 14 there will be the fifth seminar of the series, held by Dr. Daniele De Vito from Electrolux Italy S.p.A.
The seminar will be held in English.
Il calendario degli incontri di supporto e orientamento per gli studenti del primo anno del Corso di Laurea Magistrale in Automation and Control Engineering è disponibile qui.
The Automation and Control Engineering Programme offers a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Tuesday, October 28th 2021 at 9 there will be the fourth seminar of the series, held by Dr. Son Tong from Siemens Digital Industries Software.
The seminar will be held in English.
The schedule for the peer-to-peer tutoring meetings for students of the Automation and Control Engineering MSc Programme is available here.
Il Corso di Studio in Ingegneria dell’Automazione propone una serie di seminari “Automation and Control Industry Seminars”, tenuti da persone che lavorano in diversi settori industriali e indirizzati primariamente agli studenti iscritti al terzo anno della Laurea e ad entrambi gli anni della Laurea Magistrale.
Martedì 28 ottobre 2021 dalle 9 alle 10 si terrà il quarto seminario della serie, tenuto dal Dr. Son Tong di Siemens Digital Industries Software.
Il seminario sarà tenuto in lingua inglese.
The Automation and Control Engineering Programme offers a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Tuesday, September 28 2021 at 14 there will be the third seminar of the series, held by Eng. Flavio Marani from Tiesse Robots.
The seminar will be held in Italian.
Il Corso di Studio in Ingegneria dell’Automazione propone una serie di seminari “Automation and Control Industry Seminars”, tenuti da persone che lavorano in diversi settori industriali e indirizzati primariamente agli studenti iscritti al terzo anno della Laurea e ad entrambi gli anni della Laurea Magistrale.
Martedì 28 settembre 2021 dalle 14 alle 15 si terrà il terzo seminario della serie, tenuto dall’Ing. Flavio Marani che lavora presso Tiesse Robots S.p.a.
Il seminario sarà tenuto in lingua italiana.
Il 2 settembre 2021 si è tenuta la presentazione dei programmi di alta formazione di Ambassador in Green Technologies e Ambassador in Smart Infrastructures per gli studenti del corso di Ingegneria dell’Automazione.
Qui puoi scaricare le slide.
On September 2, 2021 the high-level training courses aimed at creating new professional figures, the Polimi Ambassador in Green Technologies and Smart Infrastructures, have been presented to students of Automation and Control Engineering.
Here you can download the slides.
Il Corso di Studio in Ingegneria dell’Automazione propone una serie di seminari “Automation and Control Industry Seminars”, tenuti da persone che lavorano in diversi settori industriali e indirizzati primariamente agli studenti iscritti al terzo anno della Laurea e ad entrambi gli anni della Laurea Magistrale.
Venerdì 4 giugno 2021 dalle 14 alle 15 si terrà il secondo seminario della serie, tenuto dall’Ing. Giovanni Alfieri che lavora presso Tetra Pak Food Engineering S.p.a.
Il seminario sarà tenuto in lingua italiana.
Slide delle presentazioni dell’Open Day della Laurea Magistrale in Ingegneria dell’Automazione del 26-27 maggio 2021:
Slides of the presentations for the Open Day of the Master of Science in Automation and Control Engineering held on May 26-27, 2021:
The Automation and Control Engineering Programme offers a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Friday, June 4 2021 at 14 there will be the second seminar of the series, held by Eng. Giovanni Alfieri from Tetra Pak Food Engineering S.p.a.
The seminar will be held in Italian.
Il Corso di Studio in Ingegneria dell’Automazione avvia la serie di seminari “Automation and Control Industry Seminars”, tenuti da persone che lavorano in diversi settori industriali e indirizzati primariamente agli studenti iscritti al terzo anno della Laurea e ad entrambi gli anni della Laurea Magistrale.
Martedì 5 maggio 2021 dalle 14 alle 15 si terrà il primo seminario della serie, tenuto dal Dr. Stefan Gering che lavora presso Bosch Corporate Research.
Il seminario sarà tenuto in lingua inglese.
The Automation and Control Engineering Programme is launching a series of “Automation and Control Industry Seminars”, held by people working in different industries and addressed primarily to students enrolled in the third year of the Bachelor Degree and both years of the Master Degree.
On Wednesday, May 5 2021 at 14 there will be the first seminar of the series, held by Dr. Stefan Gering from Bosch Corporate Research.
The seminar will be held in English.
Slides of the Welcome Meeting 2020/21 of the Master of Science in Automation and Control Engineering.
Slide della presentazione del Welcome Meeting 2020/21 della Laurea Magistrale in Ingegneria dell’Automazione.
La Digitalizzazione nell’Industria Manifatturiera
Roberto Zuffada – Digital Enterprise Siemens Italia
L’evento si terrà Lunedì 26 ottobre alle ore 17:30 sulla piattaforma webex politecnicomilano.webex.com/meet/maria.prandini.
L’evento è rivolto agli studenti del terzo anno della laurea triennale e a quelli della laurea magistrale.
Maggiori informazioni sono contenute nella locandina dell’evento.
Le slide della presentazione sono scaricabili da questo link, ed è disponibile la registrazione video dell’evento.
Information about the Support and Orientation Peer-to-peer Tutoring for Students of the Automation and Control Engineering MSc Programme can be found here.
Qui è possibile scaricare le informazioni relative al programma Support and Orientation Peer-to-peer Tutoring per gli studenti del Corso di Studi in Ingegneria dell’Automazione.
Slide della presentazione per gli Studenti del Secondo Anno del Corso di Laurea in Ingegneria dell’Automazione del 29 maggio 2020.
Quest’anno l’appuntamento tradizionale dedicato alle future matricole non si ferma, anzi moltiplica la sua proposta!
Dal 23 aprile al 2 maggio si svolgeranno gli Open Days virtuali con un ricca offerta di iniziative su più giorni.
Slides of the Welcome Meeting 2020/21 of the Master of Science in Automation and Control Engineering.
Slide della presentazione del Welcome Meeting 2020/21 della Laurea Magistrale in Ingegneria dell’Automazione.
Il 22 ottobre 2019, a partire dalle 17.00, si terrà presso l’Aula Rogers del Politecnico di Milano la Cerimonia di Consegna dei Premi di Laurea “Claudio Maffezzoni” e “Nicola Schiavoni” in Ingegneria dell’Automazione.
Il programma completo è disponibile scaricando la locandina dell’evento.
Slide della presentazione agli studenti della Laurea Magistrale in Ingegneria dell’Automazione.
Slides of the presentation to Master of Science Students of the Automation and Control Engineering Study Programme.
Slides of the Welcome Meeting 2019/20 of the Bachelor of Science in Automation and Control Engineering (in Italian).
Slide della presentazione del Welcome Meeting 2019/20 della Laurea in Ingegneria dell’Automazione.
La Digitalizzazione nell’Industria Manifatturiera
Roberto Zuffada – Digital Enterprise Siemens Italia
L’evento si terrà Martedì 15 ottobre alle ore 17:15 in Sala Conferenze “Emilio Gatti” presso il DEIB, Politecnico di Milano.
L’evento è rivolto agli studenti del terzo anno della laurea triennale e a quelli della laurea magistrale.
L’iscrizione è obbligatoria.
Maggiori informazioni sono contenute nella locandina dell’evento.
Il 3 ottobre 2019, a partire dalle 17.00, si terrà presso il Dipartimento di Elettronica, Informazione e Bioingegneria del Politecnico di Milano la Cerimonia di Intitolazione della Sala Seminari DEIB al Prof. Nicola Schiavoni.
Il prof. Stefano Tubaro, Direttore del DEIB, aprirà la cerimonia. Seguirà il saluto del prof. Ferruccio Resta, Rettore del Politecnico di Milano.
La manifestazione proseguirà con interventi di testimonianza dell’opera e della figura dell’illustre scienziato e docente, professore emerito del Politecnico di Milano.
Nicola Schiavoni è stato un valente ricercatore nell’ambito della Teoria dei Sistemi e del Controllo e delle sue applicazioni e si è distinto per l’impegno, condotto con passione e competenza, al servizio del Politecnico e della comunità scientifica dell’Automatica.
La partecipazione è gratuita, ma è necessario iscriversi entro il 25/09/2019 al link: www.tinyurl.com/cerimonia-schiavoni.
Slides of the Welcome Meeting 2019/20 of the Master of Science in Automation and Control Engineering for International Students.
Il Corso di Studi in Ingegneria dell’Automazione ha attivato da quest’anno i premi di Laurea in memoria di Claudio Maffezzoni e Nicola Schiavoni.
I premi sono destinati agli studenti che abbiano conseguito il titolo di Laurea Magistrale in Automation and Control Engineering nel periodo da 01/05/2018 a 30/04/2019.
La scadenza è prevista per il giorno 03/07/2019.
Starting from this year two degree awards has been launched:
The recipients of the awards are the graduate students who got their Master of Science degree in Automation and Control Engineering (LM-25) at Politecnico di Milano, in the period 01/05/2018 – 30/04/2019.
The deadline for the application is 03/07/2019.
Slides of the introduction to the Master of Science in Automation and Control Engineering (in Italian).
Slide della presentazione della Laurea Magistrale in Ingegneria dell’Automazione.